2.0 TFSI EA113 Anti Surge K04 Turbo
Anti surge core (brand new)
Uprated actuator (brand new)
Actuator preload has been set to 125n as per R-Tech's 2+ requirement
2+ setups with this turbo often make 380-400bhp and 400-430ft-lbs torque, with peak torque being achieved at ~4000rpm, you also won't have a dip in power low down as the tuner won't be avoiding the surge point.
If you wanted it as a fit and forget turbo to your current setup/tuning then I can assemble it with a new stock style actuator, just drop me a message if that's what you require.
£700 delivered
2.0 TFSI EA113 Anti Surge K04 Turbo - ET Manifold
Anti surge core (brand new)
Uprated actuator (brand new)
ET aftermarket exhaust manifold (brand new)
Actuator preload has been set to 125n as per R-Tech's 2+ requirement
2+ setups with this turbo often make 380-400bhp and 400-430ft-lbs torque, with peak torque being achieved at ~4000rpm, you also won't have a dip in power low down as the tuner won't be avoiding the surge point.
These can also be built with a new stock actuator, this will allow you to fit the turbo to replace your current with no additional mapping needed.
£600 delivered
2.0 TSI EA888.1/2 K03 Hybrid Turbos (CCZ CAW)
K04 anti surge core (brand new)
K04 actuator (brand new)
K04 exhaust housing (used but genuine)
These are bolt on turbos for your EA888.1/2 vehicles such as MK6 GTI, A3 8P FL, Seat Leon MK2 FL, etc.
The turbo on this platform is rated to make 350-365hp & 370-390lbft (dyno printout uploaded)
Hardware requirements are very basic, turbo, intercooler, exhaust and induction kit, no other hardware such as fuelling or sensors need changing. You'll just need to trim the supplied silicone elbow yourself during fitment.
R-Tech Performance are offering stage 3 tuning with this turbo, something which wasn't available until now!
£850 delivered
2.0 TFSI EA113 K03 Hybrid Turbo (BWA / AXX)
Anti surge core (brand new)
Uprated actuator (brand new)
Genuine exhaust housing (used)
Muffler delete & elbow
Stock diverter valve location on turbo
This is essentially a full frame K04-064 so you'll make anti surge K04 power/performance, of around 360-380bhp and 360-380ft-lbs on a BWA/AXX engine.
Direct fit to your 2.0 TFSI BWA & AXX engine, the actuator is setup for K04 conversion mapping; you'll need to trim the silicone elbow yourself that's it.
There is no diverter valve relocation required with this turbo, saving on pipework and the need for a DV relocation loom.
£850 delivered